Aciers pour moules d'injection plastique - Aciers résistants à la corrosion aptes au traitement thermique

This group of steels is specifically intended for use as corrosion-resistant tool steel in plastics processing.
Pre-tempered steels are steels that are already quenched and tempered by the steel supplier, usually with hardnesses of 30 to 40 HRC, and are then delivered to tool production in this condition. By omitting the heat treatment in the course of tool production, the economic efficiency can be significantly improved. With the delivery hardness in the range of approx. 30 to approx. 40 HRC, there is a good compromise between machinability and wear resistance or compressive strength (edge stability), which is sufficient for many applications in plastics processing.

Steels in this product group are usually selected martensitic stainless steels with approx. 13 to 17 % Cr , alloyed with Mo and Ni and a C content of approx. 0.30 to 0.40%.
In the production of these steels, special consideration is given to the needs of plastics processing with regard to polishability and corrosion resistance in terms of purity, homogeneity and analytical balance.
In special cases, the microstructure is specifically optimised by a special analytical balance, as is the case with BÖHLER M315 EXTRA, for example, and sulphur is added in small proportions (0.10 to approx. 0.20%) to improve machinability. However, due to the addition of sulphur, losses in corrosion resistance and polishability have to be taken into account.

Böhler Program

 

Nuance BÖHLER Melting Route Numéro d'article Standards
Airmelted
SEL ~1.2316
EN X38CrMo17
EN ISO 4957
Airmelted
SEL ~1.2316
EN X38CrMo17
EN ISO -
Airmelted
SEL ≈1.2099
EN -
EN ISO -

Contacts

Please use a browser that is not outdated.

You are using an outdated web browser.

Errors may occur when using the website.